viper 350hv in a 2003 miata

I have a 2003 miata with a viper 350HV alarm.  It was professionally installed to have a valid warranty.  Does anyone have the installation wriing diagram for this alarm and I want to add the 530T window module and would like to have this wiring diagram also.  Please help.  Thank you 

Be advised that altering that existing install is likely to void your warranty on the alarm.C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Just take the orange and RED / white from the alarm and follow the instructions on the 530t. Mount it in the car NOT one of the doors.

Gollie gee Howie.... you allways make it sound sooo easy.

It bloody well is when I,m sitting here not having to do anything. I've got a London Taxi this week, you'd love it. Low neg for the front doors and FOUR relays for the back....... the lock and unlock don't "sit" on ground so I have to pulse pos to lock and neg to unlock at same time! Actually I only need two, take the relay driven close wire from the alarm and split it to the unlock side, ha only 2 relays needed but you need the dreaded DEI 1076 on the bloody door contacts!

Thanks for the help.  You are correct it would be dumb to have installed and then void warranty with a self installed 530T.

Problems !!  I took the 530T to the store that installed the 350HV.  The installer worked hard to setup the system.  However he could no get the windows to work with the alarm remote.  He wired it up so I would have one touch up/down and that when I turn off the ignition the windows will roll all the way up.  I can use the remote to vent the windows or roll all the way down but they will not roll up when I arm the system.  Does anyone have an answer.  Your help would make me a happy man.  Thank You

The orange ground when armed output wire of the alarm must be split with 2 diodes. One side will go to the starter kill, the other to the ground when armed input of the 530T. Without the diodes, ground back feeds from the ignition thru the starter kill relay and to the 530T. After the diodes are installed your windows will stop rolling up when you turn the ignition off (which is how it should be).

Can you tell me what diodes to use.