the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

compustar 2wfm_as does not turn over


Post ReplyPost New Topic
< Prev Topic Next Topic >
kel789 
Copper - Posts: 128
Copper spacespace
Joined: June 19, 2004
Location: United States
Posted: February 02, 2009 at 9:04 PM / IP Logged  
i have compustar_2wfm_as in maxima 97. i left the car dome lamp turned on by accident so it drained the car battery over a few days and drained enough power that i can't start the car. i disconnected and reconnected the battery, thinking that it help to prevent short circuiting the alarm before jumping the car with anther car. a few days after the car was jumped started, i remote started the car but the car did not turn over. when i sat in the car, the dash lights are all lit up but it does not turn over. the car starter is working when started with the car key. the remote starter function seems to work when using it to keep the engine running without a key in the steering column. the alarm appears to arm/disarm fine. could it be the battery issue? not enough juice for the remote starter to turn over? i kinda doubt it when i can start the car with the car key. i am puzzled. does anyone have the same experience?
james bond 007 
Copper - Posts: 62
Copper spacespace
Joined: January 18, 2009
Location: Ontario, Canada
Posted: February 03, 2009 at 7:01 PM / IP Logged  

sounds like the contacts on starter output relay could be gone, you could check this by running a jumper wire from 12volts to the starter output wire coming from the unit 

kel789 
Copper - Posts: 128
Copper spacespace
Joined: June 19, 2004
Location: United States
Posted: February 03, 2009 at 7:59 PM / IP Logged  
a jumper wire is a regular wire for alarms?
i guess it's ok to use the 12volts power source from the battery. any recommendation, just in case i have a dead relay?
there is a relay between the central unit and the steering column. you want to confirm if relay is actually dead?
kel789 
Copper - Posts: 128
Copper spacespace
Joined: June 19, 2004
Location: United States
Posted: February 05, 2009 at 5:41 PM / IP Logged  
this is for those who will be experiencing what i am now experiencing.
hold 1+2, tab 3 (1 flash), tab 3 (1 flash), tab 3 (3 flashes),
hold 1+4, tab 3 (1 flash), tab 3 (1 flash), tab 3 (3 flashes),
if the horn goes off in any steps, it means you are too late. you must start over.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer