451m, locks not working

Home / the12volt's Install Bay / Car Security and Convenience / 451m, locks not working (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

chandlerspeed

Member - Posts: 2

Joined: March 21, 2009

Location: Arizona, United States

Posted: March 23, 2009 at 7:12 PM / IP Logged

Just got done rewiring a 59 Biscayne. Vehicle already had a Viper 350HV installed with a 451M controlling the locks. Everything but locks work after reinstall. Small RED / blue/green harness plugged into alarm, purple has fused keyed power, green and blue going to aftermarket two wire actuators. I did not hook up white or brown because there are no switches. What did I miss? Do white and brown need to be hooked to ground? Also noticed that blue/green on small harness have battery power, is that correct? Thanks in adavance and sorry if a repost, did a lot of research but couldn't find anything.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 24, 2009 at 2:37 AM / IP Logged

Purple should be fed permanently, NOT keyed, allow 5-71/2 amps per actuator, white and brown must be grounded, and yes the red on that small harness is also 12v+ .

chandlerspeed

Member - Posts: 2

Joined: March 21, 2009

Location: Arizona, United States

Posted: March 24, 2009 at 10:30 AM / IP Logged

Working great now, thanks. I don't know what I was thinking with keyed power. Amazing what happens when you wire something up correctly.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

451m, locks not working

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.