any alarm 2way compustar

Hi folks,

I was browsing the net for some answer to my question and found your great forums!

I own a Ford Mustang GT 2005 and I got a compustar 2way alarm installed on tuesday from the great best buy!

everything work fine on it... maybe a little too much loli have a appointement on next wensday to check out my situation but would like to have your opinion.1- when i arm it, and disarm and make couple query to see the status my dome light and radio goes on (dome light 15 sec i think and radio the factory time) that i can live with that... but after if i leave the car disarm the dash comes on and stay open until i re arm or put the key in the ignition. weird no?2- the alarm have been triggerd many time... i tought the shock sensor was too high, but no after shutting off the sensor through my remote its getting me always false alarm like some one open my door (door triggered).every +/- 30 min my car alarm ring for no reason. so for now i keep my alarm to valet mode like this i dont disturb all my neighbors.did you guys see the second situation before?i just hope if best buy dont find the problem they will refund me and take back their defective alarm.Thanks

Door pins.... where and how did you do them?

KarTuneMan, Its the Best Buy Installer who did the job. im just try to find info to tell him what expert think it will be. i know he install a wire to the dome light or dome light supervision. it is right? how can i double check the doorpins?

On the new Mustangs, they rest at N/C so when the computer on the car shuts off, it goes to an open circuit causing a false alarm. If you have a CM5000 CPU you should be able to program it to accept the open circuit door trigger.Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Velocity Motors wrote: On the new Mustangs, they rest at N/C so when the computer on the car shuts off, it goes to an open circuit causing a false alarm. If you have a CM5000 CPU you should be able to program it to accept the open circuit door trigger.

Velocity Motors, my alarm model is 2WSHLCDA ( http://www.bestbuy.ca/catalog/proddetail.asp?logon=&langid=FR&sku_id=0926INGFS10107938&catid=22514 ) can i try to program it myself to accept open circuit door trigger? can you tell me how to do it? i really appreciated

any one?

Open circuit door pins on a 2005? Unlikely, more likely they didn't follow the 1076 diagramme, also If I remember only the hood switch was open circuit. I remember fitting a normal hood switch to one.

BTW: The option chart changes if you have a CM3000 series CPU. Check to see which one you have or just make sure that the guys over at Best Buy changes the dome light delay option when using the dome light as the door trigger.Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA