python 880xp

Home / the12volt's Install Bay / Car Security and Convenience / python 880xp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ksingh

Copper - Posts: 62

Joined: November 16, 2004

Posted: May 20, 2009 at 8:35 AM / IP Logged

Fellas I currently own a 1996 honda accord EX, I Installed the Python 880XP about 3yrs ago and never encounter any issues with the alarm. This morning I went to do some errans and I hit the unlock button and i did not recieve any response from the alarm. I opened the door with the key and tried using the valet switch to over ride the alarm and that did not work either. I ended up having to power down the alarm by pulling the fuse on the power wire and then wait a couple of mins and installed it again. After that it seems to work and responding correctly. I would like to know what could have possible went wrong and if there is anything i can do like reprograming the remote so this issue does not occur anytime soon.

Thanks

Kenny

ksingh

Copper - Posts: 62

Joined: November 16, 2004

Posted: May 20, 2009 at 8:29 PM / IP Logged

God dammm 31 people viewed this page and not one of you can throw some ideas, WOW anyways I found the issue and its fixed. Thanks

Kenny

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: May 20, 2009 at 10:46 PM / IP Logged

What was the problem? A loose wire??

the12volt

Administrator - Posts: 3,955

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 07, 2002

Location: Louisiana, United States

Posted: May 21, 2009 at 12:22 PM / IP Logged

ksingh wrote:

...31 people viewed this page and not one of you can throw some ideas, WOW anyways I found the issue and its fixed. Thanks

Thread views are counted for non members, search engine spiders, etc. and really mean nothing with regards to getting or not getting a reply.

the12volt • Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

python 880xp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.