1998 Yukon Passkey II bypass

Home / the12volt's Install Bay / Car Security and Convenience / 1998 Yukon Passkey II bypass (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dfrates

Member - Posts: 3

Joined: March 27, 2003

Location: United States

Posted: March 27, 2003 at 1:55 PM / IP Logged

Just installed a Valet 552t remote start with the DEI 555l Passkey bypass. The vehicle will start and then stall when starting using the remote start. If I leave the key on in the ignition, then start using the remote, the system works fine. I can even take the key out . I have the 555l install manual and I believe everything is hooked up correct. Help PLEASE !!!!!

dfrates

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 27, 2003 at 2:24 PM / IP Logged

What wire did you use for the activation wire for the 555L ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

dfrates

Member - Posts: 3

Joined: March 27, 2003

Location: United States

Posted: March 28, 2003 at 3:27 PM / IP Logged

Jeff, I hooked it up to the blue wire from the 552t. Now I am wondering if I hooked it to the correct blue wire !! There is one in each of two harnesses. I am going to attempt to repair on Sat. morning if you can be of any help, it is greatley appreciated. Thanks, Dennis.

dfrates

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 30, 2003 at 9:53 AM / IP Logged

You should use the H3 BLUE/BLACK wire on the Valet 552T for the 555L activation wire. The BLUE wire can be programmed for the 555L but the BLUE/BLACK wire is already for hook up to the 555L.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1998 Yukon Passkey II bypass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.