07 dodge ram with no starter wire

Home / the12volt's Install Bay / Car Security and Convenience / 07 dodge ram with no starter wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jromero1297

Member - Posts: 1

Joined: April 24, 2008

Location: Texas, United States

Posted: August 18, 2009 at 4:03 PM / IP Logged

can anyone one tell me how to wire up the clifford 50.5x remote start to this truck. everything is - on it. is it as simple as it sound? just use relays to reverse the polarity. thanks in advance for your time

i am an idiot

Platinum - Posts: 13,675

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 18, 2009 at 4:44 PM / IP Logged

Accessory 1	VIOLET/BROWN	(-)	IGNITION HARNESS
Starter 1	YELLOW/GRAY	(+)	GRAY PLUG NEAR BATTERY, NOT FOR REMOTE START
Starter 2	VIOLET/BROWN	(-)	IGNITION HARNESS

If you notice the Acc wire and the starter 2 wire are the same wire, the notes say to ground that wire through a 100 ohm resistor for start. Ground the same wire throught a 610 Ohm resistor for Acc.

Ground terminal 85 and 30 of each relay. 86 of the start relay connects to the start wire of your remote start unit. Connect the 100 ohm resistor to terminal 87. Coneect the other end of the resistor to the Violet/Brown wire.

86 of the Acc relay connects to the Acc wire of the remote start unit. 87 connects to the 610 ohm resistor. The other end of the 610 ohm resistor connects to the Violet/Brown wire.

Key sense also uses the same wire. The resistor value for that is 8.5K

Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

07 dodge ram with no starter wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.