03 trailblazer

Home / the12volt's Install Bay / Car Security and Convenience / 03 trailblazer (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jerkykid7295

Member - Posts: 6

Joined: November 14, 2006

Location: United States

Posted: October 15, 2009 at 1:56 PM / IP Logged

I am realling pulling my hair out on this one guys. I am installing a compustar 1w900 and I have tried using both a fortin and ads module. The truck will not crank. I have looked through the forums and seen a few posts about this. I have both ign hooked up (pink,white) on the truck. The orange accesory wire is also hooked up. I have tried hooking the second accesory (brown) up also with no change. So after sitting on this for a day, I ran through all the key positions with a test light and noticed the the white ign wire comes on before the pink (it does stay on all the way through crank). I do have voltage on the start wire when the auto start is activated but no crank.

Any Suggestions?

Thanks

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: October 15, 2009 at 2:30 PM / IP Logged

what module did you use? what firmware? etc. etc. how was it wired? W2W or D2D?

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

ceasar326

Copper - Posts: 239

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 02, 2006

Location: Minnesota, United States

Posted: October 15, 2009 at 3:11 PM / IP Logged

Is it just a remote start or alarm also? Whats the model of the brain your using with the 1W900?

jim hunter

Silver - Posts: 351

Joined: March 23, 2006

Location: United States

Posted: October 15, 2009 at 3:28 PM / IP Logged

if this was a newer model year i would say its timing of acc and ign wires but that old of one had normal start circuit, when itsw not cranking whats the passlock light doing? sounds like either a passlock problem( or not knowing how compustar works most remote starts when a tach wires not prgrammed it wont let it crank) did you hook up tach wire? did you program it? did it accept it?

jerkykid7295

Member - Posts: 6

Joined: November 14, 2006

Location: United States

Posted: October 15, 2009 at 9:44 PM / IP Logged

Okay, admission of stupidity is in order here. I didnt have my module programmed right. I also had the wrong wire coming from the module for data (explains most of the issues). Thank you for your replies. After I was finally able to look through how things were not working I was able to figure it out.

Thanks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

03 trailblazer

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.