the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

mercedes w124


Post ReplyPost New Topic
< Prev Topic Next Topic >
red_lion 
Member - Posts: 5
Member spacespace
Joined: November 13, 2009
Location: Congo
Posted: November 16, 2009 at 7:08 AM / IP Logged  
Hello I'm lionel, I have a Mercedes w124 1992. I would like to know how to connect the DEI 530t on my 4 windows because I have a module of convienence with closing has the cle and how to adapt the drive lock system (when the car move the door lock automatic)please it' S very significant thanks
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: November 16, 2009 at 10:11 AM / IP Logged  
 Look in the 530t instruction manual, positive at rest.  Ignition controlled locking is covered in the relay section on this site.  Having said that most modern alarms already have this facility.  Your locking type is one wire, vacuum pump control. Remember 2 x 530ts required and 4 x relays.  Just a thought but doesn't that car have a comfort close, i.e. when you turn the driver's door key to lock and hold it there this will bring up the windows. Again you will need a modern alarm to control this if the facility is there.  What alarm?
red_lion 
Member - Posts: 5
Member spacespace
Joined: November 13, 2009
Location: Congo
Posted: November 19, 2009 at 7:29 AM / IP Logged  
I have a viper 5902 .Please help could i need your help how to connect to 530t in my car and viper 5902,how to adapte a system drive lock in my car.Yes I have a comfort close system when I turn the driver's door key to lock and hold it there this will bring up the windows.excuse me for my english I'm frenchman.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: November 19, 2009 at 7:41 AM / IP Logged  
You have to set the Viper locks as Vacuum type, see instructions. You will need 2 x relays or the DEI 450t relay set. Second you adapt one of the aux leads via either the programming or a Bitwriter to activate on arming for 20 seconds. This is connected to a  yellow/blue wire in the floor lom, driver's side. This is a very complicated car to do the locks and close, forget the 530t it's not necccessary. It's probably simpler to send me a return air ticket to the Congo!!!!
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: November 19, 2009 at 7:44 AM / IP Logged  
It would probably cost you less than a local install job and I'm not joking I've been all over Europe and the US with this job, as far as Houston Texas and Kuwait (not on the same day)
red_lion 
Member - Posts: 5
Member spacespace
Joined: November 13, 2009
Location: Congo
Posted: November 21, 2009 at 7:56 AM / IP Logged  
I want to install this system (Drive lock) and windows up and down when I lock my car please show me how to do .Thank you.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: November 21, 2009 at 1:17 PM / IP Logged  
It would take about 2 pages of info just to do this car and we don't even now whether it's petrol or diesel!
red_lion 
Member - Posts: 5
Member spacespace
Joined: November 13, 2009
Location: Congo
Posted: December 23, 2009 at 6:50 AM / IP Logged  
Excuse me for a long time to reply,
Please help me .I need this .My car is petrol.I know that to take 2 pages but please help me.
Thank you.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: December 23, 2009 at 3:10 PM / IP Logged  
Look to vehicle wiring, this site, M/Benz 300 circa 1992. It lists everything other than window close which is a yellow/blue lead, sits in a black rubbery sleeving or tube accompanied by a RED / white and a BROWN / black. You use a timed aux output which you set to activate on arming to close your windows and roof.
red_lion 
Member - Posts: 5
Member spacespace
Joined: November 13, 2009
Location: Congo
Posted: December 24, 2009 at 2:21 AM / IP Logged  
well for lock I know how to do,but I look how to do drive lock and how to install dei 530 with 4 windows.do you have a guide for help me
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, July 5, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer