the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

xro9100 program mode lockout


Post ReplyPost New Topic
< Prev Topic Next Topic >
1phatboy 
Member - Posts: 2
Member spacespace
Joined: June 11, 2010
Location: Colorado, United States
Posted: July 05, 2010 at 9:55 AM / IP Logged  

Finished installing an xro9100 into a 1999 Ford F-350 diesel with remote start. Everything went as expected and the system is working fine, with two exceptions, the timing setting for the wait to start timer and crank time. I want to change them a bit (crank longer and shorten the wait to start). When I try to go back into the program mode, the control unit will not let me back in. The valet switch is working, when I hold it in for three seconds it pages the remote. When I turn the ignition on and press the valet button three times, nothing...

Any thoughts?

1phatboy 
Member - Posts: 2
Member spacespace
Joined: June 11, 2010
Location: Colorado, United States
Posted: July 05, 2010 at 10:24 AM / IP Logged  

My deepest and most humble appologies guys (and gals).. After checking my connections, I noticed that the ignition #1 wire had broken contact.... Everything is just fine!! Can't remove post as I am a rookie, an xro9100 program mode lockout -- posted image. rookie at that!!

I know, check connections, check connections, check connections....

xro9100 program mode lockout -- posted image.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer