the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

03 civic security light


Post ReplyPost New Topic
< Prev Topic Next Topic >
Patel 
Copper - Posts: 86
Copper spacespace
Joined: October 20, 2002
Location: Canada
Posted: April 16, 2003 at 8:34 PM / IP Logged  
Installed a strt/alrm combo (Ultrastart 2250), unit into a 03 civic (auto) the other day, with a AUT-HONDA3 bypass. Everthing went great, everything works great (man i love installin on hondas). Anwys customer calls me today and tells me his security light ( little green key sign in the cluster) comes on when remote started. he knows that in usually flashes upon start up, then goes away, it does that when started normally with the key. but lightt stay on when remote started. This is my first 03 civic, never had this problem with 01-02's. Wondering if anyone out there knows wat the deal is?
will grounding the keysense wire help?
Patel 
Copper - Posts: 86
Copper spacespace
Joined: October 20, 2002
Location: Canada
Posted: April 16, 2003 at 8:38 PM / IP Logged  
oh ya, can anyone tell me the color and place of the keysense, if it even has one. techsoft doen't say
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: April 17, 2003 at 1:10 AM / IP Logged  
I think it's the BLUE/RED wire found in a gray plug above the fuse panel. It is (-) trigger.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: April 17, 2003 at 9:42 PM / IP Logged  
DEI's 555i already requires a connection to the keysense wire, Blue/red at ignition cylinder in 4 (or 6?) pin green plug if I remember correctly.
I've heard of the green key staying on occasionally when your driving after a remote start attempt. Not sure what the problem is. I've only had one person complain about it...and of course it was a sidejob I did.
Patel 
Copper - Posts: 86
Copper spacespace
Joined: October 20, 2002
Location: Canada
Posted: April 18, 2003 at 10:47 AM / IP Logged  
i don't know if im understanding this correctly, but shouldn't the security light go away when the key is inserted after remote starting(b4 driving off). I understand if it stays on during the remote start process, cause the car "sees" no key in the ingition. Haven't tired ground keysense yet, won't get the car until monday.
tech_advice 
Member - Posts: 45
Member spacespace
Joined: March 10, 2002
Location: Canada
Posted: April 18, 2003 at 6:34 PM / IP Logged  
Had the same problem, here's the fix, use a relay, pin 30 and pin 85 to chassis ground, pin 86 to ignition wire on security plug, pin 87 to out when running, hope this helps...chris
Patel 
Copper - Posts: 86
Copper spacespace
Joined: October 20, 2002
Location: Canada
Posted: April 27, 2003 at 12:54 PM / IP Logged  
chris
dunno if im reading this right but regarding the previous relay setup. what will this accomplish.
and what do you mean by security plug, my starter or factory security or any?
street tuner 9 
Member - Posts: 13
Member spacespace
Joined: April 13, 2003
Posted: May 05, 2003 at 8:16 PM / IP Logged  
I have the exact problem with my 2002 Honda CR-V. I connected the unit as per the instructions but for some reason the green key light keeps flashing after I insert the key and drive off with the car.
Patel 
Copper - Posts: 86
Copper spacespace
Joined: October 20, 2002
Location: Canada
Posted: May 05, 2003 at 8:38 PM / IP Logged  
fixed mine by grounding the keysense wire during remote start.
street tuner 9 
Member - Posts: 13
Member spacespace
Joined: April 13, 2003
Posted: May 05, 2003 at 9:43 PM / IP Logged  

Patel wrote:
fixed mine by grounding the keysense wire during remote start.

How did you ground only during remote start and not at any other time?

Thanks.

Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer