k20

Hello, I am totally lost on installing the K20 on my Hyundai accent, the documentation is sparse, with references to documents not available. I am just trying to install 2 actuators (spal) for my 2 door car. Are there any schematics and installation details available? any help appreciated..... thanks shane

So your Spal actuators have 2 wires or 5? Are you using the actuators only or are you installing the central locking system?This information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.

I am using 2 wire spal actuators, so no central locking. Figured it was easier than going with the 5 wire central locking. The K20 manual seems to mention driving the actuators directly, but all the outputs seem to be relay out. Any schematics or wiring advice appreciated. thanks Shane

Are there six wires on the K20 for locks, if so how are they labelled?

I have never installed a K20 but if this is the manual K20 Installation Manual Than you need to wire your system and actuators as follows: GREEN/ Black: Lock #30 Common Output = Actuator wire that goes +12V during lock WHITE/ Black: Lock #87A NC = To ground Violet/Black: Lock #87 NO = +12V Blue/Black: Unlock #30 Common Output = Actuator wire that goes +12V during lock Violet: Unlock #87 NO = +12V BROWN / Black: Unlock #87A NC = To groundThis information is provided only as a reference.

All circuits should be verified with a digital multi-meter prior to making any connections.