remote starter on a 08 avalon

Home / the12volt's Install Bay / Car Security and Convenience / remote starter on a 08 avalon (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

keung71182

Member - Posts: 7

Joined: September 14, 2010

Location: Colorado, United States

Posted: September 14, 2010 at 3:30 PM / IP Logged

Hey everyone, I need some help. I am planning on installing a remote starter on a 08 Avalon. The remote starter has an option to either have two ignition out wires or two starter wires. This vehicle requires 2 ignition and 2 starter wires for it to function. What can i do? Any input would be greatly appreciated!

Thanks,

George

beegbie

Copper - Posts: 341

Joined: August 17, 2002

Location: United States

Posted: September 14, 2010 at 4:55 PM / IP Logged

There are a few ways to do this. What brand/model remote start are you using?

keung71182

Member - Posts: 7

Joined: September 14, 2010

Location: Colorado, United States

Posted: September 14, 2010 at 4:56 PM / IP Logged

I am using a Avistart 4100

George

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: September 14, 2010 at 5:24 PM / IP Logged

You need to add an additional relay for the extra output.

Mike M2

Tech Manager

CS Dealer Services

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 14, 2010 at 5:55 PM / IP Logged

Choose either to set up for two ignitions or 2 starters, it doesn't matter which, then the one you have only one of wire as follows.

Join to existing starter or ignition output, take this to a relay and wire as follows.

From existing wire to 86,

Ground to 85,

Constant 12volt with 30 amp fuse to 87,

Output to second wire from 30.

kreg357

Platinum - Posts: 7,827

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: September 14, 2010 at 6:07 PM / IP Logged

Use the 4101s' flexable output for ING2. Look for a remote start output wire marked (-) 200 mA STARTER RELAY TURN-ON. ( I couldn't find a 4101 Install Guide, but hopefully it has this output. ) Use that output to control an extra 30/40 Amp SPDT relay mentioned above.. Wire as follows.

Relay Pin 85 to (-) 200 mA STARTER RELAY TURN-ON from Avistart

Relay Pin 86 and Pin 87 to +12v constant fused at 20 Amp.

Relay Pin 30 to Cars Second Starter wire.

Relay Pin 87a not used ( insulate).

Soldering is fun!

kreg357

Platinum - Posts: 7,827

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: September 14, 2010 at 6:08 PM / IP Logged

Howie types faster than me... remote starter on a 08 avalon -- posted image.

Soldering is fun!

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 14, 2010 at 6:11 PM / IP Logged

Yes but Kreg's answers are often more concise.

keung71182

Member - Posts: 7

Joined: September 14, 2010

Location: Colorado, United States

Posted: September 15, 2010 at 4:18 PM / IP Logged

Thanks a lot guys!! I really appreciate the quick response. I will try it and let you know.

George

keung71182

Member - Posts: 7

Joined: September 14, 2010

Location: Colorado, United States

Posted: September 16, 2010 at 12:46 PM / IP Logged

kreg357 wrote:

Relay Pin 85 to (-) 200 mA STARTER RELAY TURN-ON from Avistart

Relay Pin 86 and Pin 87 to +12v constant fused at 20 Amp.

Relay Pin 30 to Cars Second Starter wire.

Relay Pin 87a not used ( insulate).

Are you talking about:

H2/5 BLUE/WHITE (-) 200mA 2nd status/ rear defogger output. That is the only (-)200mA wire i saw on the harness.

George

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.