2008 camry hrbrid wont stay running

Home / the12volt's Install Bay / Car Security and Convenience / 2008 camry hrbrid wont stay running (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

md18

Member - Posts: 2

Joined: December 19, 2006

Location: United States

Posted: March 02, 2011 at 4:46 PM / IP Logged

I just installed a Python responder one and xpresskit DB-all into a 08 Camry hybrid and it starts but it only runs for about 15 seconds and then it shuts off. The only thing i didnt do was cut the autolight wire and put the relay in, so now after the remote start shuts off it leaves the light son for a few minutes so I'm going to hook that up next. Would that be related to the remote start not staying running? Thanks for any help

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: March 02, 2011 at 6:07 PM / IP Logged

15 seconds? Sounds like the RS does not know the car is running. What does the shutdown diagnostics tell you?

Installer, IT support, and FFL. I need less hobbies.

md18

Member - Posts: 2

Joined: December 19, 2006

Location: United States

Posted: March 03, 2011 at 8:41 AM / IP Logged

Thats a good point, i havent checked that yet, I wired it with D2D so i thought everything would be all set. The xpresskit said that it just puts out a constant 1000 rpm signal on the hybrid vehicles so do i actually have to program the remote start system to look at that for a tach signal or is it automatic once it sees that its connected D2D?

Ill be getting the car back today so I'm just trying to have a few thing to look at once i get it

Thanks

buddholly

Copper - Posts: 244

Joined: August 24, 2006

Location: United States

Posted: March 03, 2011 at 2:50 PM / IP Logged

In VirtualTach mode the car learns the tach signal after the parking lights have came on and then you need to shut it down with the remote for it to remember the signal. If you are starting it and did not let the parking lights turn on you will need to relearn virtualtach.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2008 camry hrbrid wont stay running

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.