python 1401

Home / the12volt's Install Bay / Car Security and Convenience / python 1401 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hayabusa3303

Member - Posts: 3

Joined: March 08, 2011

Location: South Carolina, United States

Posted: March 08, 2011 at 7:41 PM / IP Logged

I have a python 1401 having problems entering MTS mode.

Installed it no problems from a older remote start(design tech).

I have tried it the way the book says to do it and it will not work. If i put the unit in auto. transmission mode it starts right up.

I have check door pin negitive its a toyota tacoma. checked at brain.

I have check brake lights 12v. getting power there also.

Mts open door press and release brake pedal lights should flash maybe im doing it wrong?

hayabusa3303

Member - Posts: 3

Joined: March 08, 2011

Location: South Carolina, United States

Posted: March 08, 2011 at 7:55 PM / IP Logged

edit i also have the tach learned.

Parking brake is grounded for now.

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: March 08, 2011 at 8:01 PM / IP Logged

Hood pin connected? Toggle switch plugged in and ON ??

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

hayabusa3303

Member - Posts: 3

Joined: March 08, 2011

Location: South Carolina, United States

Posted: March 08, 2011 at 8:53 PM / IP Logged

i did check all ok

amoomaw

Member - Posts: 1

Joined: August 23, 2011

Posted: September 14, 2011 at 4:27 PM / IP Logged

I am currently installing the python 1401 with fortin key override in my 2011 tacoma auto. Which wires on the python did you hook up to for +12vdc constant ignition 2, ignition 2/flex relay output, flex relay input 87a and +12vdc constant input for acc and starer relays?

did you hook up the orange accessory output?

I'm just wanting the basic remote start, lock &unlock for my truck.

Any advice would be a great help.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

python 1401

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.