reprogramming a remote, viper 160xv

Home / the12volt's Install Bay / Car Security and Convenience / reprogramming a remote, viper 160xv (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

eanderson651

Member - Posts: 41

Joined: October 26, 2011

Location: Minnesota, United States

Posted: November 26, 2011 at 12:44 PM / IP Logged

Hello all,

I am trying to program a replacement remote for a Viper 160XV for a friend.

However, when I look at the unit, the LED status light is missing as is the valet programming button (the blue 2 pin harness)

I assume you need those to program the new remote? The bitwriter is not able to program new remotes, only features correct? As I do have a bit writer....

Thanks all!

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: November 27, 2011 at 6:38 PM / IP Logged

Yes, you need the pushbutton atleast.

Open door, turn ignition on, press then release button, then press and hold, then pree the lock button on the remote.

Release button, turn ignition off. Test remote

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

reprogramming a remote, viper 160xv

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.