the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

06 grand prix factory alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
phil6710 
Copper - Posts: 89
Copper spacespace
Joined: September 04, 2009
Location: New York, United States
Posted: January 03, 2012 at 10:58 PM / IP Logged  
Recently I installed a Compustar CS-600s with a I datalink ALCA bypass. The car would remote start and the keless features would work. But when the factory alarm was armed it would go off when remote started or the doors were unlocked with the aftermarket remote. I thought the ALCA bypass would bypas the factory alarm through data when it unlocks and or starts. It wouldent though, I had to hard wire the disarm wire from the CS-600S to the cars disarm wire. I never had this problem with other GM cars with factory alarms. Whats the deal? Is this a special vehical or a defective bypass? The bypass works for the doorlocks,trunk and the passkey, but not the factory alarm.
Solartech Window Tinting and Electronics,contract installer
kreg357 
Platinum - Posts: 7,802
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: January 04, 2012 at 4:53 AM / IP Logged  

Interesting.  Haven't done an 2006 GP but have used the GM1 firmware with other vehicles.

Assuming W2W and ADS AL(DL) GM1 firmware W/Type 3 Install.  Did you have the CS600-s Disarm output

wired to the ADS AL CA Brown Disarm Input?

Soldering is fun!
phil6710 
Copper - Posts: 89
Copper spacespace
Joined: September 04, 2009
Location: New York, United States
Posted: January 07, 2012 at 2:22 AM / IP Logged  
kreg357 wrote:

Interesting.  Haven't done an 2006 GP but have used the GM1 firmware with other vehicles.

Assuming W2W and ADS AL(DL) GM1 firmware W/Type 3 Install.  Did you have the CS600-s Disarm output

wired to the ADS AL CA Brown Disarm Input?

I did it D2D with the  gm1 software and yes type 3 ,I did not conect the C-600s org/wht disarm to any thing to the bypass. I had to conect that wire to the disarm wire on the car to solve the problem. Usualy the bypass always disarms the  factory alarm though. Maybe a bad bypass?

Solartech Window Tinting and Electronics,contract installer
metz35 
Copper - Posts: 458
Copper spacespace
Joined: January 13, 2003
Location: Pennsylvania, United States
Posted: January 07, 2012 at 6:32 AM / IP Logged  
Oddly enough my mother has same car had to do same thing with blade al. Grand prix is always the odd man out

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer