the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

swap standard keyless entry with aftermar


Post ReplyPost New Topic
< Prev Topic Next Topic >
archsu 
Member - Posts: 2
Member spacespace
Joined: January 09, 2012
Location: Nevada, United States
Posted: January 09, 2012 at 10:54 AM / IP Logged  
I bought a 1998 Cherokee XJ with standard equipped keyless entry but did not get the remotes. i was wondering if I could swap the circuit board by the dome light with an aftermarket circuit board.
Thanks,
Sam
archsu
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: January 09, 2012 at 11:51 AM / IP Logged  
youre better off buying a keyless entry or remote start with keyless entry, then wire it up. easy vehicle to work on
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 09, 2012 at 5:50 PM / IP Logged  
Or go to a Chrysler dealer for the remotes except the aftermarket KE will probably be cheaper.
Have you tried a wreckers yard? Except you're unlikely to get two remotes.
archsu 
Member - Posts: 2
Member spacespace
Joined: January 09, 2012
Location: Nevada, United States
Posted: January 10, 2012 at 10:20 AM / IP Logged  
thanks for your reply. do you know if the wires that are attached to the current wireless entry are the same wires i need for the new system?
archsu
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 10, 2012 at 10:34 AM / IP Logged  
Look at my signature lines.
Actually extremely unlikely probably a mux (resistive) single GREEN / WHITE control wire, the resistors would be built into the OEM unit, you would have to add them.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 10, 2012 at 10:38 AM / IP Logged  
ORANGE / purple and pink/purple, both neg, driver's kick panel.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 14, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer