clifford 50.7x

Home / the12volt's Install Bay / Car Security and Convenience / clifford 50.7x (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

1gr8rx7

Member - Posts: 5

Joined: August 10, 2011

Location: Florida, United States

Posted: February 27, 2012 at 6:28 PM / IP Logged

I have a clifford 50.7 x with the basic installation remote start/ hood pin/ flashing light/power door locks. I have 2 actuators that will lift my pick up truck's lid which i would like to control with the clifford remote just open and close, which wires do I connect to in order to achieve this, i know I need the relays, I just need to know what wires I need to connecto to, thanks

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 29, 2012 at 12:06 PM / IP Logged

Any of the aux output wires.

1gr8rx7

Member - Posts: 5

Joined: August 10, 2011

Location: Florida, United States

Posted: April 01, 2012 at 8:45 AM / IP Logged

Wher can I get an installers manual on this unit?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 01, 2012 at 8:51 AM / IP Logged

Look up Viper 5901 in the Downloads/Manuals section, it's the same unit.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford 50.7x

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.