the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5902, 2002 toyota tacoma


Post ReplyPost New Topic
< Prev Topic Next Topic >
.woosh808 
Member - Posts: 4
Member spacespace
Joined: March 09, 2012
Location: Hawaii, United States
Posted: March 09, 2012 at 1:13 AM / IP Logged  

Hi,

New to the fourm and trying to look for some answer to my problems. Here it is:

I have a 2002 toyota tacoma, limited, 4x4, v6, automactic

Just had the viper 5902 alarm installed. The issue im having is when I try to activate the remote start the vehicle will start but then die out after a few seconds. I'am able to keep the vehicle running if i quickly insert the key into the ignition and trun it to the run posistion after activating the remote start. The shop I had it installed is telling me i need a immobilizer bypass for the truck, the shop cant find the bypass module he needs.  I spoke with a toyota technician and he said my truck does not have a immobilizer installed. Has anyone come across this or knows what might be worng with the remote start feature or could it be just wired up wrong. Also does anyone have the wiring diagram for the alram and the truck so i can double check the wiring.

chev104275 
Gold - Posts: 1,433
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: March 09, 2012 at 8:27 AM / IP Logged  
verifying the wiring shouldn't be difficult use the key and meter the wires actions (ing,acc, ect ) then use the remote start and verify the remote start is powering all the wires the same way you're key did. If its not there's you're problem. The install guide should be under the download section at the top on this site.
For the wiring check out the link at the top of this site for wiring diagrams or readyremote.com or bulldogsecurity.com
As far as the anti theft I don't believe your truck has any (no chipped key)
If i Can't Install it    I Don't need it   Joe
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: March 09, 2012 at 11:22 AM / IP Logged  
No immobilizer, they just missed an ignition wire, which is why it won't stay running.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
.woosh808 
Member - Posts: 4
Member spacespace
Joined: March 09, 2012
Location: Hawaii, United States
Posted: March 13, 2012 at 1:11 AM / IP Logged  

Hi,

Thanks for the feed back, I justed checked out everything found the tach was not hooked up. I jump the tach wire to the igniter and remote start the truck it works fine. Now the problem im having is, is there a closer place to tap in to the tach wire besides at the igniter which is below the air box. If I did that I would have to run a seperate wire all the way into the truck. Let me know thanks

.woosh808 
Member - Posts: 4
Member spacespace
Joined: March 09, 2012
Location: Hawaii, United States
Posted: March 13, 2012 at 1:17 AM / IP Logged  
also when i remote start the truck some time the abs light flashes and wont stop flashing???? would this mean it was wired up wrong, I mean the abs light still flashes even after i put the key in and start driving!!
chev104275 
Gold - Posts: 1,433
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: March 13, 2012 at 4:54 AM / IP Logged  
Usually abs light coming on something isn't powered correctly ( ing as acc or acc as ing) when you checked the wiring did you compare it to using the key ? Did every thing power up the same ?
If i Can't Install it    I Don't need it   Joe
offroadzj 
Gold - Posts: 2,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: June 03, 2005
Location: New York, United States
Posted: March 13, 2012 at 6:27 AM / IP Logged  
Verify that all of the following wires have a connection.
12volts white (40A), WHITE/ red (30A) + ignition harness
Starter black + ignition harness
Ignition BLACK/ red + ignition harness
Second Ignition BLACK / YELLOW + ignition harness
Accessory blue/red + ignition harness
Also verify that the 2nd ignition (BLACK / YELLOW) has power from the time you activate the remote start all the way through cranking. If they did hook it up its possibly they connected it as a 2nd accessory and it will drop power during crank.
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 13, 2012 at 10:40 AM / IP Logged  
Isn't there a tach wire at pin 9 of the OBD (data socket) under dash.
That's your 15 second run time.
Also something not connected that should have been, that's your warning light.
No by-pass needed it wouldn't have started at all if one was needed.
Should your install shop still be trading with the potentially seriously expensive errors you allege them to have made?
.woosh808 
Member - Posts: 4
Member spacespace
Joined: March 09, 2012
Location: Hawaii, United States
Posted: March 13, 2012 at 12:51 PM / IP Logged  

Hi

Thanks fo rthe replys, I did check the obd socket for a tach but belive there is none. Other then that I will double check wires again and see what comes up, Also I dont want to take it back the the shop that installed it becasue it has been over a month now the guy has been trying to find a bypass module for my truck which it does not need and also looking at his wiring hook up hes a hack. So I should have saved some money and just installed it myself. will let you guys know the outcome

howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 13, 2012 at 1:14 PM / IP Logged  
You're correct, only at OBD on 4 cyl. Go to rear of inst. cluster, light GREEN/ black.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer