2009 wrangler unlimited auto trans

Installing an omega 830i7 with a fortin evo chr t2. Can't find any vehicle wiring diagrams that give a wire color or location to tap into the neutral safety switch. Also thinking about putting a hidden toggle switch to turn off the AU-94TM. Should I wire this into the constant 12v or the ground wire on the sensor harness or would this be a bad idea.

connect the neutral safety wire to ground if its an automatic. the au-94tm can be wired inline with the shock sensor if external. use 4 diodes and isolate them. this will allow the sensor to turn on everytime the vehicle is armed/locked.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

The unit has a second sensor port so no need to wire into the shock sensor. Just looking to add a toggle switch to the proximity sensor so I can switch it off without disabling any of the other sensors. Just concerned about movement of the soft top on windy days. Was wondering if I should switch the 12v or the groung wire.

you will want to switch the 12v line.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Thanks for the info.