95 jeep cherokee keyless entry install

I'm trying to install a alpine SEC-8028 alarm in my jeep, I have gotten the alarm itself woking but am havin issues with the keyless entry. I can quite figure out the wireing to the factory relays. There is a green wire that is going from 87a on the unlock relay to 87a on the lock relay, also each relay has 2 grounds but they are all tied together across both realys. And the unlock relay has a pink/purple which I think is a positive lead but not really sure, the lock also has a ORANGE / purple wire which is also a positve. then each relay also has another wire which i cant remember the colors for. Does anyone have any idea what to connect what to for this alarm. Any help would be greatly appreciated.

well i got the keyless entry on the alarm to work via the alarm remote, but a new problem has poped up. If the locks are pluged into the alarm the door switch will not work, it does not even trip the relay but the dome lights will dimm and or blow the fuse to the dome lights(which are not supposed to be on the same fuse as the locks). If i unplug the locks from the alarm module the lock swiches will function again normally. Any ideas how to fix this??