00 mustang viper 3203

Hi, Need help to complete the installation. I have connected almost everything and I'm having problems with two connections. Dome light supervision doesn't work. I have hook-up the BLACK/ white (pin 3/GEM 20PIN) to viper WIRE H1/9 and H2/7 to ground. It's not working? What I did wrong? Also, starter kill. Does my car is Starter normally closed? I'm not an expert, but I was able to connect door lock and other feature whit the help of this forum. Any help will be greatly appreciated.alain

I have uploaded list of current connection. Highlighted in yellow are ones that is not working. Any help will be appreciated I’m completely stopped alain

I haven't yet looked up the alarms manual and your cars connections to verify but looking at what you've posted if its accurate, you have the black whit out to the car for dome supervision needing to see a + signal from the white violet flex relay wire but you have that wire grounded. If the info is correct then the white violet flex relay wire needs to be hooked up to 12 v +Gary Sather

Thanks Gary. It's working now. I was confused I guess What about the starter kill. Is it Normally Closed (Motor Side)? alain