the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Automatic window and sunroof


Post ReplyPost New Topic
< Prev Topic Next Topic >
Mr_Fusion 
Copper - Posts: 113
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 03, 2002
Location: United States
Posted: May 12, 2003 at 8:15 PM / IP Logged  
Hello, I am working on a '99 Grand Prix with a factory sunroof. So far I was able to install the window roll-up with no problems. I did the same to the sunroof but it only worked about 5 times before I had a problem. The automatic close works fine, it is when I try to use the factory button to open the sunroof. It has completely stopped working...(factory button) the roll-up module still works fine.
Really, my question is that:
       I used a standard window roll-up module (controls 2 windows) to operate the sunroof. I only connected the left window side of the module to the sunroof and left the right side disconnected. Has anyone else done this same type of installation and did you have any problems? I know that DEI makes a sunroof module but I figured that I would try the window module first since it is only $15.
x6369x 
Copper - Posts: 108
Copper spacespace
Joined: November 10, 2002
Location: United States
Posted: May 12, 2003 at 11:05 PM / IP Logged  
As long as you used only 1 set of wires (either striped or non-striped) off of the 530T to control the sunroof you should be fine.
If the factory switch is no longer working, check the fuse. Also, you could splice back together the factory wiring, and see what happens.
Friends Don't Let Friends Bump Stock.
cpgoose 
Gold - Posts: 1,098
Gold spacespace
Joined: July 08, 2002
Location: United States
Posted: May 14, 2003 at 9:30 AM / IP Logged  
Did you figure it out? I'm just curious because I'm interested in trying this too. Only, my sunroof doesn't stop on its own, it will just keep going and kill the motor. Does the window mod you used stop the window automatically? I know the DEI module does, but I don't think that's the module you're using.
jaxman 
Copper - Posts: 185
Copper spacespace
Joined: November 16, 2002
Location: Denmark
Posted: May 14, 2003 at 4:56 PM / IP Logged  
Use a DEI 529T. That will do the work for sure and it worths all the money.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer