the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

remote starter 2013 nissan titan


Post ReplyPost New Topic
< Prev Topic Next Topic >
allglass 
Member - Posts: 3
Member spacespace
Joined: October 20, 2013
Location: New Brunswick, Canada
Posted: October 20, 2013 at 10:53 AM / IP Logged  
Need help on the disarm & re-arm of this vehicle...Fortin or I-Data bypasses will not do this vehicle..Directed Electronics wire diagram says go 2 Driver's main power window switch use Factory alarm disarm "Red" double - & Factory alarm arm "Blue"...I'm installing a Autostart 1780. I tried these wires with no luck in disarming, with these wires hooked up & hitting the autostart lock button it will lock the doors & if both front windows are lowered it will raise the doorglasses alittle also. What I need for the truck to do is unlock the door 1st (disarm)& start the vehicle & then re-lock after starting. Per Directed you can't program remote starter to do this as the disarm & re-arm works off of data
glassman
triniforever 
Copper - Posts: 323
Copper spacespace
Joined: November 12, 2008
Location: New York, United States
Posted: October 20, 2013 at 7:03 PM / IP Logged  
Look at install 2 on Idatalink's website for that vehicle using a CA module.
triniforever
allglass 
Member - Posts: 3
Member spacespace
Joined: October 20, 2013
Location: New Brunswick, Canada
Posted: October 20, 2013 at 7:20 PM / IP Logged  
thanks I'll check it out asap
glassman
allglass 
Member - Posts: 3
Member spacespace
Joined: October 20, 2013
Location: New Brunswick, Canada
Posted: October 20, 2013 at 7:35 PM / IP Logged  
Pin 7 & 8 are empty @ BCM?..when i talked 2 tech @ Directed he said the only way was @ Drivers main switch..Fortin advised me Pin 7 & 8 are empty & no way 2 connect it there..Fortin advised use the autostart dis-arm & re-arm wires which i have hooked up per Directed's pic...if Pins 7 & 8 are empty (no wires) I can connect there? I went 2 a seminar last month & asked autostart tech about this 2013 Titan & he told me no problems..easy install
glassman
racerjames76 
Silver - Posts: 581
Silver spacespace
Joined: November 22, 2008
Location: Ohio, United States
Posted: October 21, 2013 at 9:09 AM / IP Logged  
If the remote is a 2013/2014 model I think designated by a 4 at the end, and it is a DEI brain it should have something called SAFELOCK in the menus that can be turned on. This will operate LOCK after start. Yes the wires can be accessed in the drivers door, but it is easier to just attach a diode on the end of the door lock wires and insert that diode (band towards the remote start) into pins 7 and 8 that have no wires. Just carefully feel the wire go in and it should have SLIGHT tension on it when fully inserted. You can then wire tie it to keep it from sliding back out. remote starter 2013 nissan titan -- posted image. It sounds worse than it is really. I promise this is how most of us pros are doing these.
To master and control electricity is perfection. *evil laugh*

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, July 5, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer