the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

wiring door locks 06 freestar


Post ReplyPost New Topic
< Prev Topic Next Topic >
speersy 
Member - Posts: 17
Member spacespace
Joined: December 23, 2010
Location: Ontario, Canada
Posted: November 10, 2013 at 3:17 PM / IP Logged  

I am trying to figure out the wiring for the remote door locks and have located the door pins and lock unlock wires all negitive based on my wiring diagrams.

the remote starter is a prostart  ct3371

wiring door locks 06 freestar -- posted image.

in the diagram above it shows to cut and install a diod then then conect power with 3k resister then a second diod and door triger positive.

Is door triger positive, the remote positive door input?

I have a(-) negitive door input

   (+)  positive door input

 (-) unlock output

 ( -) lock out put

Is this the best way to connect this or am I not understanding the diagram?

I would think you would just use the negitive inputs to pulse the negitive pins

any help is appreciated thanks

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 10, 2013 at 4:06 PM / IP Logged  
If this is only a remote starter then you dont have to worry about the door triggers
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
speersy 
Member - Posts: 17
Member spacespace
Joined: December 23, 2010
Location: Ontario, Canada
Posted: November 10, 2013 at 4:20 PM / IP Logged  

I would like to use the door locks if possible to get rid of one remote.

i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: November 10, 2013 at 8:03 PM / IP Logged  
Door Locks and Door Trigger are 2 completely different things.
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: November 10, 2013 at 8:11 PM / IP Logged  
If you still want to do door locks, and there is a door lock output on your RS unit.
     Power Unlock DARK BLUE/GREEN (-) IN HARNESS IN DRIVERS KICKPANEL
     PowerLock WHITE/ VIOLET (-) IN HARNESS IN DRIVERS KICKPANEL
Notes read also at smart junction box under drivers side dash. Pins 1 and 3.
speersy 
Member - Posts: 17
Member spacespace
Joined: December 23, 2010
Location: Ontario, Canada
Posted: November 10, 2013 at 8:41 PM / IP Logged  

i am an idiot wrote:
Door Locks and Door Trigger are 2 completely different things.

Thanks maybe a little info would be helpfull Im a little stupid but I do know how to fix things and usually figure things out. Some day you might need some info about somthing some one else is more informed about thanks for your time.wiring door locks 06 freestar -- posted image.

speersy 
Member - Posts: 17
Member spacespace
Joined: December 23, 2010
Location: Ontario, Canada
Posted: November 10, 2013 at 8:49 PM / IP Logged  

i am an idiot wrote:
If you still want to do door locks, and there is a door lock output on your RS unit.
     Power Unlock DARK BLUE/GREEN (-) IN HARNESS IN DRIVERS KICKPANEL
     PowerLock WHITE/ VIOLET (-) IN HARNESS IN DRIVERS KICKPANEL
Notes read also at smart junction box under drivers side dash. Pins 1 and 3.

thanks for the response

I have the wires located but am not sure whether I need the above wiring or can just conect the negitive pulse to the lock and lock wires

thanks

i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: November 10, 2013 at 8:58 PM / IP Logged  
The diagram you posted is for door trigger. That is what sets the alarm off if the door gets opened. Just connect the door lock wires from your system to the 2 wires I posted.
speersy 
Member - Posts: 17
Member spacespace
Joined: December 23, 2010
Location: Ontario, Canada
Posted: November 11, 2013 at 4:44 AM / IP Logged  

Thanks

Thats what I thought but couldent figure out  why the wiring diagram was included with  no explanation.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer