Help GEM Module on Ford

Home / the12volt's Install Bay / Car Security and Convenience / Help GEM Module on Ford (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Jamieh560

Member - Posts: 2

Joined: May 18, 2003

Location: United States

Posted: May 18, 2003 at 1:55 PM / IP Logged

I installed a Viper 300esp on a 97 ford explorer and I'm getting the false alarm 45 minutes after its been alarmed. I got the dioides on the door triggers. I know its the Gem and the power save reley, but don't no what wire to cut and add dioide at the gem module. I could should use any info I can get, its about to drive me crazy! Thanks

cpgoose

Gold - Posts: 1,098

Joined: July 08, 2002

Location: United States

Posted: May 19, 2003 at 9:33 AM / IP Logged

You might want to check out this post.

I did a search on GEM in the forums, and this is what I got.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Help GEM Module on Ford

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.