Posted: January 15, 2015 at 4:54 AM / IP Logged
Posted: January 15, 2015 at 8:29 AM / IP Logged
Posted: January 15, 2015 at 2:38 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version

| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com
Sunday, October 26, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Sunday, October 26, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.




I'm trying to fir an Avital 2101 keyless entry kit to it, with the pinout below:
The SPAL central locking is triggered by earthing either the purple or the brown wire (to lock or unlock respectively).
I have wired up the 2101 with the main power, earth and ignition .. when I press lock or unlock on the remote I can hear the relays inside click, however (with a multi-meter) I'm not able to see either 12+ or earth on any of the H5 through H9 leads.
I'm a bit at a loss, I'm not able to find anything in the manual that talks about setting the polarity for the locks, just the parking lights. I'm generally pretty good with these things however the manual for this is quite poor.
Thanks!
Dec

