Want to Wire Lock Actuator to Work with a Door Pin Switch

Home / the12volt's Install Bay / Car Security and Convenience / Want to Wire Lock Actuator to Work with a Door Pin Switch

Welcome Guest :)

Members

< Prev Topic Next Topic >

leeangie96

Member - Posts: 1

Joined: June 12, 2019

Location: Mississippi, United States

Posted: June 12, 2019 at 6:50 AM / IP Logged

Hi,

I am looking for some guidance here.

I am using the Autoloc suicide door safety pins on my build, and have them wired to engage when I put the car in drive.

I would like to use a door pin switch to act as a safety feature, where the actuator would only engage when the door is closed.

Thanks in advance for your assistance.

Lee

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: June 12, 2019 at 4:23 PM / IP Logged

Can you be more specific? Are you connecting to a factory door trigger? If so, what is the vehicle? Have you tested polarity and switch type (NO,NC)?

My ex once told me I have a perfect face for radio.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.