door trigger/700IQ to new RS3

Here is my question : In the car now, there is a 700IQ(pic above, top diagram) the gray wire going to a negative door trigger/dome light. Disarm and the dome light goes on for thirty seconds and then turns off-I can hear the relay. Armed-when you open the door of course, the door trigger/dome light turns on sending a signal/tripping a zone. Now that I am installing the RS3, I know that I am going to be using the GREEN/ negative door trigger input. Am I going to need any extra relays, or diodes for the domelight supervision light wire on the RS3? Tie them all in one(door trigger and domelight supervision? :confused: Please HELP. Thank you in advance for your time.

Since it's a DEI product now. yes you have to use a relay set it up to throw ground. Door side on 30 and ground on 87-or vise versa. On the RS3 use the BLACK/ white wire in the Primary harness on 86 and +12 volts fused on 85. Tommy

-Clifford/Directed/Alpine-Audio & Security-

New York Installer