Help Me Please

Home / the12volt's Install Bay / Car Security and Convenience / Help Me Please (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

youknownb

Member - Posts: 6

Joined: October 17, 2002

Location: United States

Posted: July 02, 2003 at 1:33 AM / IP Logged

I am currently installing a compustar alarm with a power window module. The window module needs a ground when armend output and also needs to be hooked up with the ground when armed part of the starter kill relay. I cannot find another ground when armed output except for the one on the starter kill relay and if i hook up both wires it cancels out the module. Any Ideas on how to make it work.

Thanks

Nick

Manokat

Member - Posts: 12

Joined: May 27, 2003

Location: Canada

Posted: July 02, 2003 at 6:17 AM / IP Logged

Diode isolate the starter kill and windows module input and connect them to "ground when armed output" of the alarm. Another solution is to add an extra relay for the window module.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Help Me Please

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.