pass lock 2

Home / the12volt's Install Bay / Car Security and Convenience / pass lock 2 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

blondeguy

Member - Posts: 1

Joined: October 18, 2003

Posted: October 18, 2003 at 10:22 AM / IP Logged

Is there any way to to trick the pass lock (98 GMC P/U 24 ga. red with white tracer) with out haveing to use a $70. module.

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: October 18, 2003 at 11:20 AM / IP Logged

wow, I have never seen a module that cost $70, where did you see that? there is a slick bypass module that has a 4 easy wire install which uses the data line. It learns the resistence on its own instead of having to measure the resistence yourself. That way you dont need to cut the wires either. The module is called the PLDATA and you can take a look at it here: www,bypasskit.com

There is a link on there to their retail site. I dont know where else you can buy one but there are other places.

I personally use a relay and a resistor to bypass the passlock I and II (Most of the time)

Here is a link to a diagram using a relay and a resistor:

Passlock II Temporary Bypass (Diagram #2)

Good luck

J Rilla

Owner/Installer

HamiltonAudio

Silver - Posts: 278

Joined: October 15, 2003

Posted: October 18, 2003 at 12:02 PM / IP Logged

That $70 is a full pop, retail shop price (ouch). they cost about $20 cdn to buy if you're a dealer...

misterjimbo

Silver - Posts: 535

Joined: October 11, 2003

Location: Michigan, United States

Posted: October 18, 2003 at 5:47 PM / IP Logged

i us the audiovox as-gm4 to take care of pass lock... just bought 2 today 12 dollars each here in michigan

HamiltonAudio

Silver - Posts: 278

Joined: October 15, 2003

Posted: October 18, 2003 at 7:47 PM / IP Logged

sounds about right....but I've always been skeptical of audiovox products pass lock 2 -- posted image. I insist on using genuine Autostart modules...not only is the warranty and support excellent, they simply plug into the back of each model I sell, making the install SUPER slick....and if I do the exchange, I'm paying about the same. so I'm happy!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pass lock 2

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.