ford 5 spd problem

Home / the12volt's Install Bay / Car Security and Convenience / ford 5 spd problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: October 27, 2003 at 6:09 PM / IP Logged

i did a rs in a 2003 mustang 5 spd and ran into a problem i diode isolated the seperate triggers wire but after 1/2 hour the vehicle checks the doors and takes it out of sequencing so no remote start i now know you have to relay isolate the wires. Have some ideas about doing this but some input would be appreciated.

thx kirk

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: October 27, 2003 at 6:30 PM / IP Logged

Wire a relay as follows:

86 - door trigger wires from car, diode isolated from each other of course.

85 - constant +12v

87 - ground

30 - to door trigger input of remote start.

The pulse the car sends out to the door triggers during the check isn't strong enough to trigger the relay.

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: October 27, 2003 at 6:34 PM / IP Logged

hi jworm

thanks for the info thats what i had in mind but i wasn't 100% on whether the gem would trigger the relay

thanx kirk

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ford 5 spd problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.