the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Remote start/rear defrost


Post ReplyPost New Topic
< Prev Topic Next Topic >
Falcon 1 
Copper - Posts: 130
Copper spacespace
Joined: November 15, 2003
Location: Canada
Posted: November 15, 2003 at 5:55 AM / IP Logged  
I would like any info on how to switch on the rear defrost with remote start. I have a 1998 Chrysler Concorde. Thanks.
Do it right the first time, only a doctor can bury his mistakes.
defective 
Silver - Posts: 642
Silver spacespace
Joined: August 20, 2003
Location: Canada
Posted: November 15, 2003 at 8:32 AM / IP Logged  
it's not possible i dont think, theres a timer built into the switch, i'm sure you could probably bypass the switch with a relay but i dont know the colors and would have to test the car to find out
Falcon 1 
Copper - Posts: 130
Copper spacespace
Joined: November 15, 2003
Location: Canada
Posted: November 16, 2003 at 5:27 PM / IP Logged  
Thanks for the reply I know they are on timers (mine is 12min) but I was only trying to somehow switch it on with remote start so window would be defrosted by the time I enter the car.
Do it right the first time, only a doctor can bury his mistakes.
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: November 16, 2003 at 6:55 PM / IP Logged  
i would go straight to the button and see wassup
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
sroth140 
Silver - Posts: 513
Silver spacespace
Joined: August 27, 2003
Location: United States
Posted: November 16, 2003 at 8:07 PM / IP Logged  

profuse007 wrote:
i would go straight to the button and see wassup

good call.  i was just on the phone with DEI about that.  they told me to test all of the wires on the switch and mimic what they are doing.  what unit are you using?  you might have to have an output that can be programmed to pulsed output.  some defoggers are triggered that way.  i did a nissan quest and i just applied voltage to the wire on the switch and it ran the grid and turned the light on.  it was activated by pressing an extra channel on the remote and shut off with the same button.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, July 13, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer