CT-5000 Prostart

Home / the12volt's Install Bay / Car Security and Convenience / CT-5000 Prostart (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

highvoltage

Member - Posts: 2

Joined: November 22, 2003

Location: Canada

Posted: November 23, 2003 at 9:26 PM / IP Logged

Before I start Wiring, does any one have total schematics of how this whole system is wired?

Thanks!!!

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: November 23, 2003 at 10:22 PM / IP Logged

hi let me know what you need are far as schematics and ill see what i can do .

thks

kirk

highvoltage

Member - Posts: 2

Joined: November 22, 2003

Location: Canada

Posted: November 24, 2003 at 9:57 AM / IP Logged

What I need is an overall schematic of what parts are involved. Example, does the relay provided in kit used and if so how?

Does the (+)30 A 5th relay output need to be wired' ifso what to?

Does the (-) rearm output connect to door pin for interior lights?

Where does the (-) ground out when running wire connect to?

I am putting this into a 1998 Dodge Ram with no power door locks or windows, does this cause a problem with this unit?

Thanks!!!

HamiltonAudio

Silver - Posts: 278

Joined: October 15, 2003

Posted: November 29, 2003 at 1:06 PM / IP Logged

it sounds to me like you should do a little more reading before you tackle the install. The 5th relay is only if you need to power a second ignition or starter wire (jumper on back of unit to set). This depends on the vehicle. The re-arm wire will only be used on a vehicle that has factory security that you'd like to (and are able to) rearm. The ground out when running wire is only useful for triggering relays and data modules to bypass security, clutches, etc. Likely not used.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

CT-5000 Prostart

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.