1999 dodge ram 2500

Home / the12volt's Install Bay / Car Security and Convenience / 1999 dodge ram 2500 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Julio Martinez

Member - Posts: 8

Joined: December 20, 2003

Location: United States

Posted: December 27, 2003 at 5:48 PM / IP Logged

I have a mega 3600 alarm, and i'am having problems with the remote starter installation. Does Any doddy have any idea?

Search for other posts by Julio Martinez

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: December 27, 2003 at 5:57 PM / IP Logged

Would that be a Omega system? And what exactly is the problem you are having?

Regards

EVIL Teken . . .

Julio Martinez

Member - Posts: 8

Joined: December 20, 2003

Location: United States

Posted: December 27, 2003 at 6:05 PM / IP Logged

Is not a omega system, It is a MEGALARM (Mega 3600) Remote Engiene Starter With Pager Alarm System.

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: December 27, 2003 at 6:24 PM / IP Logged

And your problem is what, exactly as it pertains to the RS portion of the unit? 1999 dodge ram 2500 -- posted image.

Julio Martinez

Member - Posts: 8

Joined: December 20, 2003

Location: United States

Posted: December 27, 2003 at 6:27 PM / IP Logged

I canot get the remote starter to work.

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: December 27, 2003 at 6:32 PM / IP Logged

Julio Martinez wrote:

I canot get the remote starter to work.

1. RS lights up the side marker lights, and you hear it prime the engine. Then the RS shuts off.

2. RS engages the starter, then shuts off.

3. RS enagages the starter, over cranks, under cranks, then shuts off.

4. RS starts the vehicle and runs for awhile, then shuts off.

5. RS does absolutely nothing. No lights, priming, cranking. Just dead.

Pick one . . .

Julio Martinez

Member - Posts: 8

Joined: December 20, 2003

Location: United States

Posted: December 27, 2003 at 7:05 PM / IP Logged

5. RS does absolutely nothing. No lights,priming, crancking. JUST

DEAD. From: Julio

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: December 27, 2003 at 7:30 PM / IP Logged

So at what part of the installation process are you on?

Julio Martinez

Member - Posts: 8

Joined: December 20, 2003

Location: United States

Posted: December 27, 2003 at 9:37 PM / IP Logged

I'am finish. All other thins work but the RS. Julio

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: December 27, 2003 at 11:03 PM / IP Logged

Do you have the tach source connected, and programmed as per the manual?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1999 dodge ram 2500

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.