Bulldog problem or power lock

Home / the12volt's Install Bay / Car Security and Convenience / Bulldog problem or power lock (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ajpjr

Member - Posts: 9

Joined: December 31, 2003

Posted: January 10, 2004 at 5:54 PM / IP Logged

Installed a bulldog 1001 in my 1990 Bronco ll today. Let me start out by saying I've been having trouble with my factory power door lock on the driver's side. So I took off the door panel and disconnected the power door lock untill I can replace motor. I then hooked up the Bulldog to the battery terminal of my starter solenoid. I set the shock sensor then armed the system. When I opened the driverside door nothing happen. When I open the passenger side door the alarm went off. The interior lights comes on which each door. I then hooked the driverside power doorlock back up and the alarm activated on the driverside and not the passenger side. The vehicle has an ultra start remote start that is hooked up to the factory power door locks. Is my problem the power door lock thats not working or something else. The power door lock was not working at all when activated.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: January 10, 2004 at 6:53 PM / IP Logged

does everything work the way it should from the ultrs start transmitters????

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

daniel2002p

Silver - Posts: 524

Joined: October 10, 2003

Location: United States

Posted: January 10, 2004 at 11:09 PM / IP Logged

looks like you need seperate door triggers for each door, or what I like to do go to the dome light and test for the door trigger wire. there will be a hot, ground and a alternating wire, which is the door trigger wire.

2005 Toyota Corolla S

1.8L VVT-i I-4

Always double check your wires with a DMM!!!

Do Not Use A Test Light!!!

MECP Certified Installer!

Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

ajpjr

Member - Posts: 9

Joined: December 31, 2003

Posted: January 11, 2004 at 9:16 AM / IP Logged

Every thing works fine with ultra start. I wondring if its the broken power door lock breaking the circuit somehow.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Bulldog problem or power lock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.