the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2 wire power door lock install?


Post ReplyPost New Topic
< Prev Topic Next Topic >
vang 
Member - Posts: 16
Member spacespace
Joined: December 29, 2003
Location: United States
Posted: January 21, 2004 at 11:10 PM / IP Logged  
I just got myself a set of the 2 wire power door lock/unlock actuators.  I want to add these to my alarm.  My alarm has the keyless entry feature but I'm not sure how to hook it up.  Am I gonna have to purchase some relays?   How do I hook them up to my alarm also.   
RufNUSD 
Copper - Posts: 184
Copper spacespace
Joined: December 10, 2002
Location: United States
Posted: January 21, 2004 at 11:17 PM / IP Logged  
Year make model of vehicle and alarm make model could help.
I have a car and I want a stereo, which one will fit and make me win contests?
Someone pass me that bottle.
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: January 21, 2004 at 11:22 PM / IP Logged  
i guess the actuator you just purchased is an aftermarket product thats reverse polarity. check on this site at left column in relay.
good luck!!!!
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
vang 
Member - Posts: 16
Member spacespace
Joined: December 29, 2003
Location: United States
Posted: January 21, 2004 at 11:27 PM / IP Logged  
You never heard of this alarm before that's why I didn't mention it.  It's a KCJS VT-V12 two way RS/alarm.  Trying to hook up the door locks to my 92 civic.  I don't think it really matters on the car because I'm using aftermarket door lock actuators which uses 2 wires.
vang 
Member - Posts: 16
Member spacespace
Joined: December 29, 2003
Location: United States
Posted: January 21, 2004 at 11:31 PM / IP Logged  

profuse007 wrote:
i guess the actuator you just purchased is an aftermarket product thats reverse polarity. check on this site at left column in relay.
good luck!!!!

Just checked it out.  I'm just confused on which wire's from the alarm to hook it up with.  I hava a seperate 6 pin door lock/unlock harness.  Says that I need a lock relay which is connected to 3 wires and the unlock harness that is connected to the other 3 wires.  What wire do I hook it up to? 

RufNUSD 
Copper - Posts: 184
Copper spacespace
Joined: December 10, 2002
Location: United States
Posted: January 21, 2004 at 11:43 PM / IP Logged  
Ok Vang take the - lock and unlock wires coming from your new toy. Hook those to 85 on each relay. 86 and 87 12v. 87a gnd. 30 will go to one wire of the motor and 30 of the other relay will goto the other wire. voila. If yo want a door lock switch tie into 85 and wire to ground.
Someone pass me that bottle.
vang 
Member - Posts: 16
Member spacespace
Joined: December 29, 2003
Location: United States
Posted: January 22, 2004 at 12:26 AM / IP Logged  

RufNUSD wrote:
Ok Vang take the - lock and unlock wires coming from your new toy. Hook those to 85 on each relay. 86 and 87 12v. 87a gnd. 30 will go to one wire of the motor and 30 of the other relay will goto the other wire. voila. If yo want a door lock switch tie into 85 and wire to ground.

I got that part figured out now.  The only problem I am having now is which wire from my alarm to hook it up to?  I have one wire from my alarm that says it's used for 2 stage door unlock output 300ma(-).  Do I attach this single wire to 86 or one relay and 85 from the other relay?  I don't see any other wire output that says it's for lock output.  

sroth140 
Silver - Posts: 513
Silver spacespace
Joined: August 27, 2003
Location: United States
Posted: January 22, 2004 at 11:15 AM / IP Logged  
use the lock and unlock wire from the brain, and usually they are blue and green.  i know on DEI products you have to use a 451m to operate actuators.  basically its two relays in one.
vang 
Member - Posts: 16
Member spacespace
Joined: December 29, 2003
Location: United States
Posted: January 24, 2004 at 3:58 PM / IP Logged  

I posted earlier but lost the post about installing the 2 wire aftermarket power door locks to my alarm. 

My alarm has a lock/unlock harness.  3 green wires and 3 blue wires.  Green for unlock and blue for lock.  I don't know if this is correct but this is what I've come up with for what each wire does.

One of the blue and green wire is the constant 12(v) wire fused for power.

Another of the blue and green wire gives out the 12(v) source.

The last of the 3 wires on each color is the output of the lock and unlock.

I tried the door lock relay diagram for the 2 wire system but had no luck.  It didn't work at all so I came back to ask more questions.  Let  me know what you think I should do.

vang 
Member - Posts: 16
Member spacespace
Joined: December 29, 2003
Location: United States
Posted: February 15, 2004 at 3:24 AM / IP Logged  

anyone out there know what's wrong??

Tried the relay info found on here and hooked it all up and still not working...anyone have ideas?


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer