hesitant to use my PKF Ver. 4.05

Home / the12volt's Install Bay / Car Security and Convenience / hesitant to use my PKF Ver. 4.05 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

repair

Member - Posts: 2

Joined: February 01, 2004

Location: Central African Republic

Posted: February 04, 2004 at 9:38 PM / IP Logged

I have a been running my remote start with a key under the plastic close to the baril for the last while, because I am scared of dying out on the road because of my pkf bypass cut ignition wire to baril. I have and an output from control unit of remote start that goes to ground when my truck is running by remote start only. Not when truck is run by key.

Will this work for my truck it seams like this delay to ground till after the truck has started will have it act like no key at all and not start.

Somebody give me the needed push I need to install this thing by saying it will work or it should work.

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: February 05, 2004 at 4:13 PM / IP Logged

PKF's work flawlessly, I've installed about 100 over the last year, none have had problems.

repair

Member - Posts: 2

Joined: February 01, 2004

Location: Central African Republic

Posted: February 05, 2004 at 7:11 PM / IP Logged

Thank you that is what I needed to hear, I will give this thing a try. I hope those 100 PKF you installed were like mine with the cut ignition wire to the baril. The other forum on the PKF install had a crimestopper model that this is reattached after. Wish mine was like that.

Yes Jeff I will leave a donation if this thing works

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

hesitant to use my PKF Ver. 4.05

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.