01Explorer Sport Keyless Entry

I am installing an Audiovox AA-925 in a 01 Explorer Sport and i am having difficulties getting the relays to work for the door locks i know that the wire in the kick panel are pink / YELLOW pink/green. Can some one help

is this a sport trac??? or just a sport Ford Explorer 1997-2001 Power Lock:    PINK / YELLOW DRIVER KICK PANEL ***** Power Unlock:    PINK/L GREEN DRIVER KICK PANEL ***** Ford Explorer Sport Trac 2001 Power Lock:    Pink / YELLOW Driver's Kick Panel*** Power Unlock:    Pink/Lt. Green Driver's Kick Panel*** *** If Equipped With Factory Keyless Entry, See Note #201 - Negative Pulse Door Lock Diagram. Without Keyless Entry, See Note #203 - Reverse Polarity Door Lock Diagram Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Cut one of the 2 door lock wires...if you lose both functions you have a reverse polarity system and need relays or a DRL module...if you cut one wire and you only lose that one feature then its a wire tie in assuming the unit you're installing has dual polarity DRL outputs.

Its just a Sport. And now the problem i am having is that when i cut the wire lets say to the lock when i go to the passenger door i can lock the doors but i cant unlock. And Vice Versa. But my driver side door doesnt work at all. now when i hook up my relays i hook up pin 87 and 86 to 12v then i hook pin 85 to the module's output. NOw when i hook up the lock side to the 87a middle pin i blow a fuse. if i hook up just the motor leg to pin 30 then when i press lock then it locks the doors but i still have no control from the driver side door. If i hook up.both ends to pin 30 then when i lock the doors it locks but blows a fuse. What am i doing wrong?