Ignition Sequence

Home / the12volt's Install Bay / Car Security and Convenience / Ignition Sequence (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

markcars

Silver - Posts: 662

Joined: December 11, 2002

Location: New York, United States

Posted: March 10, 2004 at 10:54 AM / IP Logged

WHen you turn the key to ACC, radio etc get power.

When you turn the key to ON, Ignition gets power.

IF there are 2 ignitions, do both get power at the same time or is there a delay between the two?

When y ou turn the key to START, power to ACC gets cut off while the DC Starter motor gets energized. Does power to 2nd ignition get cut off too during this time?

derek123

Copper - Posts: 163

Joined: October 09, 2003

Location: Canada

Posted: March 10, 2004 at 12:22 PM / IP Logged

Does power to 2nd ignition get cut off too during this time

=============================================

No. It is an IGN, so it is + 12 in "run" and "crank"

IGN 1 and 2, 3 etc... will come on at the same time,.

markcars

Silver - Posts: 662

Joined: December 11, 2002

Location: New York, United States

Posted: March 10, 2004 at 7:00 PM / IP Logged

My car has 2 ignition cables. I connected only one.

However when I remote start, the heater or AC do not run.

I don't know if it is the second ignition powering my heater/AC or an extra Accessories power. Reason why I think this, is because when you "crank" the engine, ACC and heater/airconditionner both go off until the car is back on IGN.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Ignition Sequence

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.