94 Eagle Talon alarm help

Home / the12volt's Install Bay / Car Security and Convenience / 94 Eagle Talon alarm help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

s2000vtc

Member - Posts: 14

Joined: March 21, 2004

Posted: March 21, 2004 at 12:28 PM / IP Logged

I just finished installing an alarm in a 94 Eagle Talon Tsi/Awd. I tested all my connections and the alarm works fine but my 4 ways and turn signal indicators dont work but the turn signals are fine. Also my fuel, oil psi, and temp gauges are screwed up. Can someone please help me out here???

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 21, 2004 at 4:36 PM / IP Logged

Disconnect the parking light wire from the alarm and see if the problems persist. If they go away, you need to isolate the parking out output of the alarm from the car with a relay. If the problem is still there, then what you have to so is remove wire one by one until the problem is not there.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

s2000vtc

Member - Posts: 14

Joined: March 21, 2004

Posted: March 22, 2004 at 2:51 PM / IP Logged

ok thanks. i tried disconnecting the wire to the parking lights and that didnt fix the problem. Any idea which other wires might cause this? I'd just like an idea where I should start.

s2000vtc

Member - Posts: 14

Joined: March 21, 2004

Posted: March 22, 2004 at 4:43 PM / IP Logged

Thanks for all the help but I found the problem and now I feel really stupid. I disconnected a plug above my fuse box when I was installing the alarm and I never plugged it back in. Everything works fine now.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

94 Eagle Talon alarm help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.