Turning reverse lights on

Home / the12volt's Install Bay / Car Security and Convenience / Turning reverse lights on (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Jar2187

Member - Posts: 4

Joined: November 11, 2003

Location: United States

Posted: March 28, 2004 at 12:09 PM / IP Logged

I have a 92 explorer with an aftermarket prusuit alarm. The new chevys esp. the suvs,when the doors are unlocked with the remote it turns on the reverse lights and the headlights. I want to set my keyless entry up like this. How would I do this?

bmf1000d

Silver - Posts: 345

Joined: September 30, 2003

Location: United States

Posted: March 28, 2004 at 3:19 PM / IP Logged

You need to wire relays to mnake both the headlights and the reverse work. YOu have to isolate the reverse and headlights, if you want them when you unlock you have to to hook them to a domelight entry.

"Big" Mike

Double Take

Fremont, Ne

remember to check all your wires with a dmm not a test light!!

i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 28, 2004 at 3:52 PM / IP Logged

BLACK/ PINK (+) at the gear selector switch on the transmission.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Jar2187

Member - Posts: 4

Joined: November 11, 2003

Location: United States

Posted: March 29, 2004 at 4:54 PM / IP Logged

Ok, thats a start. How do I find a remote trigger output on the alarm box. The alarm was put in 93, so its old. The are two wires that are cut on the harness that plugs into the box, dont know what they are for.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 29, 2004 at 5:17 PM / IP Logged

what model of alarm do you have?

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Jar2187

Member - Posts: 4

Joined: November 11, 2003

Location: United States

Posted: March 30, 2004 at 2:28 PM / IP Logged

I dont know what the model number is but I have the Seriel Number. It is 924430500551 -01. I hope this helps. Also if someone knew where I could a wiring diagram.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Turning reverse lights on

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.