Concept 300 Accessory Wiring

Home / the12volt's Install Bay / Car Security and Convenience / Concept 300 Accessory Wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

graemesimpson

Member - Posts: 24

Joined: April 29, 2003

Location: United Kingdom

Posted: May 03, 2004 at 10:55 AM / IP Logged

Hi Guys,

Was hoping someone might be able to advise me on the following:

I have a Clifford Concept 300 Installed, I have the Aux/Accessory wire and I need to hook up a remote boot solonoid. I realise I have to connect everything up through a relay but don't know what needs to go where, etc.

Any advise would be gratefully appreciated.

Graeme

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 03, 2004 at 11:03 AM / IP Logged

If the AUX wire is a (-) output and the boot solenoid is a (+) trigger use this: http://www.velocitymotorsport.com/images/install_notes/N2P.jpg

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Concept 300 Accessory Wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.