2000 Plymouth Neon Door Trigger Problem

Hey All,

Could use a little help. I have a 2000 Plymouth Neon that I installed a Viper 650VX alarm system on. I followed every instruction to the T and used the reference here for the wiring diagram. Well, the good news is it installed almost perfect. The problem I have is... all the door triggers set the alarm off except the driver door (Which the (-) trigger wire is hooked to (Light Blue/Orange Strip). Not sure what to make of it. Any input would be great.

Thanks,

gspin

I think it could be a defective driver door pin switch.Why dont you switch with the passenger one and see what happens.

driver door pin is tan and passenger is blue/orange in each respective kick. diode isolate and solder to the green wire. Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta