the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

99 Nissan Altima GLE


Post ReplyPost New Topic
< Prev Topic Next Topic >
pfellner 
Member - Posts: 3
Member spacespace
Joined: June 11, 2004
Location: United States
Posted: June 11, 2004 at 5:33 PM / IP Logged  
I've just installed an aftermarket security system (Internet Alarms IAS 100/200) but I need to deactivate or disable the factory "Keyless Entry" system which is interfering with it. The IAS works fine but when I disarm it, it unlocks the doors and sets off the factory system.
I talked to a less than helpful Nissan person at the local dealership who said I could just disconnect the fuse for it. There are 3 separate fuses for it.
Anyone know specifically what needs to be done?
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: June 11, 2004 at 6:21 PM / IP Logged  
OEM Alarm Arm L GREEN/ RED (-) AT "SMART ENTRANCE
OEM Alarm Disarm GREEN/ YELLOW (-) CONTROL TIMER" *
* "Smart Entrance Control Timer" Is A BLUE Module Located Behind The Driver Dash To The Right Of The Steering Column.
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
pfellner 
Member - Posts: 3
Member spacespace
Joined: June 11, 2004
Location: United States
Posted: June 11, 2004 at 10:08 PM / IP Logged  
Draasch. Thank you for the guidance but I'm not sure what I am supposed to do. I am well versed in electronics but by no means am I a professional. Could you help me out some more and explain what I am to do? Thank you VERY much for your help!
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: June 11, 2004 at 11:11 PM / IP Logged  
take yur door lock wires and tap the wires that i sent you.
if you pulse the factory alarm wires, it will arm and disarm the factory system...
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
pfellner 
Member - Posts: 3
Member spacespace
Joined: June 11, 2004
Location: United States
Posted: June 11, 2004 at 11:24 PM / IP Logged  
Thanks David. I'll give it a shot!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, August 7, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer