car wont start after alarm installed

Home / the12volt's Install Bay / Car Security and Convenience / car wont start after alarm installed (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jits1980

Member - Posts: 15

Joined: March 11, 2004

Location: United States

Posted: June 25, 2004 at 12:40 AM / IP Logged

my 92 integra wont start now that my buddy installed my alarm wrong. he didnt put a fuse line on it and it smoked up all my wires. it burnt up the power and ground wires and now my car wont start. do you think my brain is fried on my alarm or you think i need to put new leads the those wires? it has started kill so i dont know if that is why my car wont start?..and help....the alarm is crimestopper 200cs on a 92 integra

jits

Javelin3o4

Copper - Posts: 239

Joined: August 22, 2003

Location: United States

Posted: June 25, 2004 at 1:42 AM / IP Logged

well i'd probably remove the alarm all together tape everything back up, reconnect the cut starter wire that what probably cut when installing the starter kill relay, then see if it starts, if it doesnt check all fuses under the hood and dash especially the ignition fuses. then i'd probably let a professional install the alarm if its even any good anymore.

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: June 25, 2004 at 7:25 AM / IP Logged

Check your main 80 amp fuse under the hood. You may have fried it also.

Do it right the first time

jfk51502003

Copper - Posts: 221

Joined: March 04, 2004

Location: United States

Posted: June 25, 2004 at 10:57 AM / IP Logged

def. de-install...or have it de-installed...wow...probably should find someone who knows car electronics to prevent further damage...but if your gonna try ...do what jav said...might be a good idea to dis-connect negative battery terminal before attempting to remove old alarm....!dis-connect main harness...tape this up right away( before proceeding...then start dis-connecting the wires...how did he tap into wires...? do not pull...take your time...im sure the install is not going to be par either so ...make sure to tape all exposed wires...everything...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

car wont start after alarm installed

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.