the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

How do i use my remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
john__john 
Member - Posts: 6
Member spacespace
Joined: July 27, 2004
Location: United States
Posted: July 27, 2004 at 9:41 PM / IP Logged  
hey guys .. first time post here .. this morning i was messing with my alarm remote .. dont kno what kind it is .. but all of a sudden after a few button presses .. my 2001 toyota tundra starts up automatically .. then i get into the car .. and then i step on the gas without the key in .. and the engine cuts off ?? how do i use it .. my remote looks like this:
How do i use my remote start -- posted image.
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: July 27, 2004 at 10:34 PM / IP Logged  
take a look under the dash and see if you can see the module under there......it could be an add on to an alarm system.......
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
john__john 
Member - Posts: 6
Member spacespace
Joined: July 27, 2004
Location: United States
Posted: July 27, 2004 at 10:44 PM / IP Logged  
yes there is a module underneath the dash .. it says model ap9775 or that 9 could be a 5 .. not sure though .. thank you very much .. does this help in figure out the solution?
sroth140 
Silver - Posts: 513
Silver spacespace
Joined: August 27, 2003
Location: United States
Posted: July 27, 2004 at 10:54 PM / IP Logged  
its audiovox.  you can find it on the website.  if it shut off... try putting the key in and turning it to ignnition like youd normally drive.  then hit the brake, shift, and off you go.
MECP certified installer
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: July 27, 2004 at 10:54 PM / IP Logged  
draash, I think he just wants to know how to use it.
You probably held down one of the buttons for a few seconds and activated the remote starter. Go do that again. After it starts, disarm the alarm and get in the car. Put the key in, turn it to "ign" or "run" and then step on the brake. Drive away.
I think that might be a remote for a Prestige alarm. I've never installed them, but have customers who have had them on a rare occasion. I'm not sure how the butttons operate.
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: July 27, 2004 at 11:01 PM / IP Logged  
i was thinking he would be able to get an owner's manual for the unit and that way he would know how to use the by-pass as well....
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
sroth140 
Silver - Posts: 513
Silver spacespace
Joined: August 27, 2003
Location: United States
Posted: July 27, 2004 at 11:05 PM / IP Logged  

these are the new versions, they dont have the old one on the website anymore, but im sure a polite email will work.  they have similar model numbers, and if you click on the transmitters link off the main mobile page, you have to select them by shape... which they have that boomerang one listed.

http://www.audiovox.com/webapp/wcs/stores/servlet/ProductDisplay?type=model&catalogId=10001&storeId=10001&categoryId=ap9775&langId=-1&page=&urlString=&productid=768

MECP certified installer
john__john 
Member - Posts: 6
Member spacespace
Joined: July 27, 2004
Location: United States
Posted: July 27, 2004 at 11:12 PM / IP Logged  
thank you very much guys .. but the manual at that site doesnt really help =/
sroth140 
Silver - Posts: 513
Silver spacespace
Joined: August 27, 2003
Location: United States
Posted: July 28, 2004 at 12:49 AM / IP Logged  
like i said, email them.  you could find the 1-800 on there and call support too.  there are people they pay for telling their customers things such as what you are looking for.  make them work.
MECP certified installer
Kev. 
Copper - Posts: 64
Copper spacespace
Joined: October 22, 2003
Location: United States
Posted: July 28, 2004 at 8:45 AM / IP Logged  

That looks just like my old Prestige remote. Try pushing the last (bottom, black) button twice, then it should start. Like the others said... jump in, turn the key to run, hit the brake, and away you go.

 It has been a couple of years since I used that alarm so if the last button doesn't do it try the middle one (pushing it twice), but I think it is the last one..

Kev.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer