creating a 1 second pulse??

Home / the12volt's Install Bay / Car Security and Convenience / creating a 1 second pulse?? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

naughtydog

Copper - Posts: 90

Joined: May 02, 2002

Location: United Kingdom

Posted: September 15, 2002 at 2:22 PM / IP Logged

I have a puzzling problem??

I have a vehicle that I am adding additional remote controlled dead bolts to. The vehicle is a VW T4 ( it's a UK van).

On most vehicles the original door locking motor wires are used to power the bolts in normal cases if the OE handset is used to control the bolts. On this particular vehicle, the OE motor wires rest at positive/negative rather than negative/negative. In other words, when you operate the OE locking, the lock wire stays positive rather than pulsing a positive for 1 second. If I attach my dead bolts, the motor will be permanantly powered and will result in a damaged motor. How can I create a 1 second pulse from this motor wire using a relay and resistor setup.

I'm stuck - big time...

Nick

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 15, 2002 at 4:54 PM / IP Logged

https://www.the12volt.com/relays/page5.asp#ctm

This is what your looking for. hope this helps and post your results .

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

creating a 1 second pulse??

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.