the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Remote Start on 02 GM MC not working.


Post ReplyPost New Topic
< Prev Topic Next Topic >
Top_Notch 
Member - Posts: 1
Member spacespace
Joined: August 04, 2004
Location: United States
Posted: August 04, 2004 at 4:51 PM / IP Logged  

< language=>I recently acquired an '02 Monte Carlo SS from a

private party.  The car has on it, a 'Valet' (Model
561T made by Directed Electronics) remote start. 
Activation is integrated with the GM key fob, just
click 'lock' 3 times and <enter Dorothy joke here>. 
The previous owner demonstrated to me that it worked. 
I even tried it at home, once.  Of course, it no
longer works for some reason, probably because I went
to go show my wife how great my car is.  She was duly
impressed.
 
Here is what happens.  I click lock 3 times.  The
headlights come on, the interior accessories run (I
can hear my radio), and I can hear the fuel pump
prime.  At this time the car should crank and start,
but instead nothing.  The car never cranks.  The
system must see the engine isn't running, and repeats
it's process (twice more), but each time it should
crank the engine...deafening silence.
 
Does anybody know how to trouble-shoot these things? 
I know it worked when I bought it.  I bring it home
and a week later...nothing.  
 
Could Passlock have anything to do with it?  Is there
a relay that cranks the car that could be bad? (I
assume it engergizes a relay to crank the car and
perhaps the relay went bad?) Anything I should check?
Anything specific to look for? I made sure the car was
in park, no brake or parking brake on, doors closed,
ect...     

I would appreciate any information and help anyone

could give to me regarding troubleshooting this.

draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: August 04, 2004 at 8:41 PM / IP Logged  
put the key in the ign. and try it again.....if it works then the bypass is not working.....also look under the hood and see there is a pin switch....if so, make sure it is working..............
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 11, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer